Verified hardware

Zebra ZT610R, verified with Chainlink

On September 21, 2026, BW verified a Zebra ZT610R with Link-OS 6.6 (V80.20.24Z) and Chainlink Wizard 1.4.0: discovery, setup, calibration, test label, registration by serial number and alerts in Chainlink.

Download Chainlink Wizard View label printing
Illustration of the Zebra ZT610R

Verification record

Zebra ZT610R

Field-verified
Date
September 21, 2026
Firmware
Link-OS 6.6 (V80.20.24Z)
Test
Full Wizard 1.4.0 flow on real equipment
Connection
Network, with Chainlink Wizard: discovery, setup, media calibration, test label and alerts.
Available in
All plans · RFID encoding in Professional and Enterprise
Verified on
September 21, 2026
Firmware
Link-OS 6.6 (V80.20.24Z)
Connection
Network, with Chainlink Wizard 1.4.0

Reviewed October 29, 2026 by the Business in a Wave team

01

What was tested

BW tested the complete Chainlink Wizard flow on the physical printer, over the network, with its alerts reaching the instance.

  • The test used labels without a chip; RFID encoding remains to be verified with a roll of RFID labels
02

What Chainlink Wizard does with the printer

  1. Discover

    The model and serial number of each printer.

  2. Set up

    The Wizard applies the configuration and reads it back.

  3. Calibrate

    The label sensor, for the loaded media.

  4. Test and register

    A test label and registration by serial number.

03

Labels consumed by setup

Each step that uses labels is optional, and the Wizard states how many labels it will use.

  • Checking a printer that is already set up uses no labels
04

Confirming that a label was printed

Before sending a job, the Wizard checks whether the printer is ready.

  • When the printer is paused or out of labels, the job waits and is not lost
  • A job is marked as printed only when the label counter advances
05

Alerts that reach Chainlink

The printer sends its alerts, such as pause or out of labels, directly to your instance.

  • In the test, the pause alert reached Chainlink
  • The Wizard reports the status every 30 seconds
06

RFID encoding with Chainlink

In Professional and Enterprise, Chainlink sends the printer the EPC encoding, and the Wizard calibrates its RFID antenna.

  • The write will be verified with a roll of RFID labels
  • See RFID labels
07

Other compatible Zebra printers

Any Zebra printer with ZPL prints through the Wizard; see hardware.

  • Compatible

    Industrial

    ZT411, ZT421, ZT231, ZT510, ZT610 and ZT620

  • Compatible

    Desktop

    ZD411, ZD421, ZD611 and ZD621

  • Compatible

    Mobile

    ZQ520, ZQ521, ZQ620 and ZQ630, and earlier models with ZPL

  • Compatible

    RFID encoding

    ZT411R, ZT421R, ZT620R, ZD611R and ZD621R

How it is configured

Help center articles with the steps inside Chainlink.

Help center

Keep reading

Frequently asked questions

For any other question, contact sales.

Does the ZT610R connect by USB? +

The BW verification was performed over the network. Chainlink Wizard also connects Zebra printers by USB, but that connection with the ZT610R is not field-verified.

What happens if the printer’s IP address changes? +

The Wizard tracks the printer by its MAC address and finds it again when the DHCP server assigns a different address.

What does it cost to connect it? +

Each connected printer uses one printer license; the price per plan is on the pricing page. The printer and labels are purchased from a distributor.

Subscribe to Chainlink online

Your instance is created when sign-up is complete, ready to set up your warehouse.

Subscribe online Talk to sales

Essentials and Professional are purchased online by card: the first month and the implementation are charged at subscription. 30-day trial by invitation: request it from sales.